home *** CD-ROM | disk | FTP | other *** search
/ Monster Media 1996 #14 / Monster Media No. 14 (April 1996) (Monster Media, Inc.).ISO / modem / 0204t2b1.zip / PROBLEMS < prev    next >
Text File  |  1996-02-14  |  6KB  |  157 lines

  1.  INSTALLATION PROBLEMS ?
  2.  ~~~~~~~~~~~~~~~~~~~~~~~
  3.   When you run INSTALL.EXE, the files 0204TER1._XE and
  4.   0204TER2._XE (and, optionally, other files 0204TER?._XE)
  5.   all need to be in the same directory.
  6.  
  7.   If you encounter any problems with our low level
  8.   installation routines (music, screen, etc,) then:
  9.  
  10.   1)   run     INSTALL.EXE /NOINTRO      instead...
  11.  
  12.   OR
  13.  
  14.   2)   Try rebooting with a `vanilla flavour'  CONFIG.SYS
  15.        and AUTOEXEC.BAT with no Terminate and Stay Resident
  16.        software (`TSR's) and make sure you specify AT LEAST
  17.        Files=40
  18.  
  19.  
  20.   If INSTALL.EXE finished work, but you're having problems
  21.   starting T2.EXE, then try to run T2.EXE with appropriate
  22.   parameters:
  23.  
  24.          /NOEMS  - to disable use of EMS
  25.   and/or
  26.          /NOXMS  - to disable use of XMS
  27.   and/or
  28.          /FASTCONFIG[=port[,speed]] - to pass through all the
  29.                                       configuration questions
  30.                                       and configure TERMINATOR 2
  31.                                       manually (by setting the
  32.                                       port, bps, etc, etc)
  33.  
  34.   or, to see the available command-line switches, run:    T.BAT ?
  35.  
  36.  
  37.  MEMORY REQUIREMENTS
  38.  ~~~~~~~~~~~~~~~~~~~
  39.  TERMINATOR 2 needs at least 550k of conventional (`below 640k')
  40.  free memory to run.
  41.  (2MB extended or expanded memory can be used when you shell out
  42.  and is, therefore, highly recommended but will not remove the
  43.  REQUIREMENT for at least 550k of conventional (`below  640k')
  44.  memory so use another terminal program if you can not achieve
  45.  this minimum figure!)
  46.  
  47.  To gain conventional free memory, experiment with the /BUF
  48.  command line switch to decrease the amount of memory used by the
  49.  overlay (at the expense of a slight speed penalty. eg:
  50.  T2 /BUF:64
  51.  is the minimum memory needed by TERMINATOR 2'S overlay (100 will
  52.  be a better compromise for many)
  53.  
  54.  If you load TERMINATOR 2 using the /DBG switch you will be able
  55.  to keep an eye on memory useage...
  56.  
  57.  
  58.  MOUSE PROBLEMS ?
  59.  ~~~~~~~~~~~~~~~~
  60.  Try toggling PECULIAR MOUSE in CHANGE CONFIGURATION, TOGGLES
  61.  ( [ALT][O], [O], toggle Peculiar mouse on/off )
  62.  
  63.  
  64.  PROBLEMS IN MULTITASKING ENVIRONMENTS
  65.  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  66.  Absence of an adequate FIFO Chip (eg: 16550 UART) may cause
  67.  problems with data loss (refer to further technical
  68.  documentation...)
  69.  
  70.  If you experience Screen corruption or data loss even with an
  71.  adequate FIFO, then try using FOSSIL (such as Ray Gwinn's SIO
  72.  for OS/2 Warp) or increase the VDM session priority.
  73.  
  74.  Unexpected CARRIER DROP - try to increase session priority or
  75.  try to use a FOSSIL driver instead of direct COM port access.
  76.  
  77.  
  78.  DATA LOSS PROBLEMS UNDER DOS
  79.  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  80.  Problems may also occur when running TERMINATOR 2 on 'slow'
  81.  computers or if the TERMINATOR 2 overlay file is not able to
  82.  load into EMS or XMS.
  83.  These problems relate to TERMINATOR 2's internal 'multitasking'
  84.  kernel and are similar to problems in a multitasking
  85.  environment.
  86.  
  87.  Our suggestions are:
  88.   1. Do not open windows other than the terminal window before
  89.      and during file transfers
  90.   2. Try to increase the input buffer size in Communication
  91.      setup, Receive Buffer Size:
  92.      [Alt][O], [C], select device, [Enter], [R]
  93.   3. Try to decrease Bps of port:
  94.      [Alt][O], [C], select device, [Enter], [B]
  95.  
  96.  
  97.  KEYBOARD
  98.  ~~~~~~~~
  99.  If you are using an 83-keys keyboard, change Enhanced keyboard
  100.  setting in toggles:
  101.  [Alt][O], [O], Enhanced keyboard OFF
  102.  
  103.  
  104.  UNRESOLVED PROBLEM(S)
  105.  ~~~~~~~~~~~~~~~~~~~~~
  106.  If you STILL have problems, check out the comms gurus on your
  107.  local BBS or the various nets.
  108.  
  109.  But NOT before you have tried a `vanilla flavoured' system:
  110.  
  111.  1) Create backup and archived copies of your original AUTOEXEC.BAT
  112.     and CONFIG.SYS files
  113.  
  114.  2) Edit both files to remark out ALL lines that are not ABSOLUTELY
  115.     VITAL to boot your system: especially TSR's and Soundblaster
  116.     drivers and including memory management software such as QEMM.
  117.     (type "rem " at the beginning of each line you wish to render
  118.     temporarily operational)
  119.  
  120.     Make sure, though, that you have a
  121.     Files=25
  122.     statement (25 is the absolute minimum number of file handles
  123.     needed) and, of course, whatever keyboard driver you need.
  124.     Remove the mouse driver at this point, though.
  125.  
  126.  3) Reboot your system and TERMINATOR 2 should run OK.
  127.  
  128.  4) Reinstate each line you previously remarked out until you
  129.     discover the culprit line that causes hiccups anew.
  130.  
  131.  
  132.     If the unpack procedure completed normally, and you've tried all
  133.     the advice above, but you STILL have problems, then please run
  134.     REPORT.BAT ? to create a report file for us.
  135.  
  136. User to user support is available for TERMINATOR 2 in the SHAREWARE
  137. public conferences of FidoNet, ILink and RIME available on many fine
  138. Bulletin Board Systems.
  139.  
  140. Please be aware that these are all moderated conferences and differing
  141. messaging standards apply - so please read the appropriate guidelines
  142. for the particular conference before posting.
  143.  
  144. In each and every case, please check that your proposed question has
  145. not *ALREADY* been answered in an older message in the conference or
  146. in \DOCUMENT\FAQ.DOC
  147.  
  148. I shall make an effort to maintain at least a weekly presence in each
  149. of these conference, but travel and work commitments may mean that
  150. short absences are unavoidable..."
  151.  
  152.  
  153.  
  154. àß½¿ π éáߠ󫺡¿¬½¿ ¬á¬¿Ñ-½¿í« »p«í½Ñ¼δ »p¿
  155. páí«ΓÑ ß »p«úpá¼¼«⌐, ¿½¿ éδ σ«Γ¿ΓÑ óδ߬áºáΓ∞
  156. ßó«¿ »pÑñ½«ªÑ¡¿∩, ¡á»¿Φ¿ΓÑ ¡á¼ »« áñpÑßπ
  157. 2:469/38@fidonet